MP-Pistol Forum banner

9c with apex fss trigger kit - Can I add a RAM kit?

1K views 2 replies 3 participants last post by  KRWeiss 
#1 ·
So I got the FSS kit installed. It really made this gun awesome.
I got this kit: https://store.apextactical.com/WebDirect/Products/Details/191816


Now, I was thinking about getting the RAM kit. But....

1. I could not see if it were compatible with the compact
2. When having the FSS kit installed, what would be the advantages/expectations (if it is compatible). If I were to get a RAM kit.
3. What RAM kit should I get?

They make 2, 1 w/o a magazine disconnect (I suppose)
https://store.apextactical.com/WebDirect/Products/Details/191847

And

The RAM with a magazine disconnect
https://store.apextactical.com/WebDirect/Products/Details/191848


Any guidance please!
 
See less See more
#2 ·
If I understand it right it depends on the age of your gun. My 2011 compact gun has the RAM and the Duty Carry kit, but my 2013 gun the sear block and frame is different and won't accept it. The older gun is the old frame style with no thumb safety and the newer one is the newer universal frame with the thumb safety cutouts and the frame plugs.
 
#3 ·
The FSS has no interactions with the RAM, and they are not dependant on each other. If your frame has a universal sear block, which means it has a manual safety or the square frame plugs, then it is not compatible with the RAM. If your frame has the round frame plug, where the internal lock goes, or if it has an internal lock (which will need to be removed, and plugged), then it is RAM compatible.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top