M&P Exploded View (High Resolution)

jasonuscg · April 14th, 2011, 10:31 PM

I took the time to convert the .PDF and edit out the part numbers into a high resolution .PNG for everyone to use. I'll be adding in numbers to correlate to a list of parts with proper nomenclature when I get around to it, I'll post it in this thread.

For now, enjoy.

Here is a link to an uncropped version.

http://img5.imagesha.../mpexploded.png

jasonuscg · April 14th, 2011, 10:38 PM

M&P parts nomenclature (incomplete concerning TS models)

Sight, Front
Slide
Pin, Extractor
F/P Plunger Spacer
Spring, Striker Block
Striker Block
Extractor
Spring, Extractor
Set Screw, Rear Sight
Sight, Rear
Guide, Striker Spring
Keeper, Striker Spring
Spring, Striker
Bushing, Striker
Spring, Striker Return
Striker
Barrel
Cap, Recoil Guide Rod
Spring, Recoil
Guide Rod, Recoil
End Cap, Slide
Plate, Slide End Cap
Magazine Tube
Follower, Mag.Tube
Magazine Spring
Butt Plate Catch, Mag.
Butt Plate, Mag.
Frame
Coil Pin, Locking Block
Headed Pin, Trigger
Grip Strap, Med.
Locking Block
Takedown Lever
Retaining Wire for Takedown Lever
Spring, Trigger Return
Pin, Trigger Bar
Pin, Trigger Assembly
Trigger, Lower
Trigger, Upper
Trigger Bar
Pin, Sear
Ejector
Sleeve, Lock
Spring, Lock
Cam, Look
Pin, Sear Deactivation Lever
Sear Housing Block
Spring, Sear
Plunger, Sear Return
Sear
Spring, Mag. Safety Lever
Safety Lever, Mag.
Deactivation Lever, Sear
Grip Strap, Small
Grip Strap, Large
Spring, Spacer
Plug, Frame Key
Assembly, Striker
Assembly, Slide
Assembly, Sear Housing Block
Assembly, Trigger Bar
Assembly, Slide Stop
Assembly, End Cap
Assembly, Recoil Guide Rod
Assembly, Magazine
Assembly, Magazine Catch
Assembly, Frame Tool

KRWeiss · April 14th, 2011, 11:08 PM

What are the chances of getting an expoded parts diagram of an M&P built in the last 4 years, this decade, 2011...?

jasonuscg · April 14th, 2011, 11:23 PM

Quote:

Originally Posted by KRWeiss

What are the chances of getting an expoded parts diagram of an M&P built in the last 4 years, this decade, 2011...?

I am always looking for the latest information available. If I find anything I will link it.

mpco · April 15th, 2011, 05:35 AM

Thanks jasonuscg! Appreciate the work.

Dave

BARobinson · April 15th, 2011, 07:46 AM

Nice job, thank you

dhunley1 · April 15th, 2011, 12:38 PM

Cool. Thanks for sharing.

sed · April 27th, 2011, 08:55 PM

Thanks for sharing.

JDP_12 · May 9th, 2011, 11:14 AM

Very cool - this is a much needed document. All of the diagrams out there are low-res CRAP! Nice work. Looking forward to the annotated one. Thank you!

jasonuscg · July 8th, 2012, 01:02 PM

It seems as though ImageShack has reduced my file's resolution (a-holes)... I guess I need to reload it once I am able to get back to my desktop.

cdunn · July 8th, 2012, 02:21 PM

thanks,is there a version with part#s and names?

MCarmer · July 8th, 2012, 04:25 PM

not the newest M&PS but its still pretty darn neat.

MCarmer · July 8th, 2012, 04:25 PM

Quote:

Originally Posted by cdunn

thanks,is there a version with part#s and names?

+1

OCMP9 · December 4th, 2012, 08:46 AM

Thanks!

GTownGeorge · January 22nd, 2013, 12:08 PM

What is the pin that is perpendicular to the slide to the rear of the ejector port? And what is its purpose? Just curious.

94gtcoupe · January 22nd, 2013, 01:52 PM

Extractor pin.
Holds the extractor in place.

OP, thanks for posting up the hi res image.

cwp297 · February 3rd, 2013, 12:15 AM

Here is something I "Photochopped" together for my M&P 40c. I hope it helps. (I hope the jpeg makes it to the the forum)

CP

April 14th, 2011, 10:38 PM	#2
jasonuscg Senior Member Join Date: Dec 2009 Location: Salish Sea Posts: 3,344	M&P parts nomenclature (incomplete concerning TS models) Sight, Front Slide Pin, Extractor F/P Plunger Spacer Spring, Striker Block Striker Block Extractor Spring, Extractor Set Screw, Rear Sight Sight, Rear Guide, Striker Spring Keeper, Striker Spring Spring, Striker Bushing, Striker Spring, Striker Return Striker Barrel Cap, Recoil Guide Rod Spring, Recoil Guide Rod, Recoil End Cap, Slide Plate, Slide End Cap Magazine Tube Follower, Mag.Tube Magazine Spring Butt Plate Catch, Mag. Butt Plate, Mag. Frame Coil Pin, Locking Block Headed Pin, Trigger Grip Strap, Med. Locking Block Takedown Lever Retaining Wire for Takedown Lever Spring, Trigger Return Pin, Trigger Bar Pin, Trigger Assembly Trigger, Lower Trigger, Upper Trigger Bar Pin, Sear Ejector Sleeve, Lock Spring, Lock Cam, Look Pin, Sear Deactivation Lever Sear Housing Block Spring, Sear Plunger, Sear Return Sear Spring, Mag. Safety Lever Safety Lever, Mag. Deactivation Lever, Sear Grip Strap, Small Grip Strap, Large Spring, Spacer Plug, Frame Key Assembly, Striker Assembly, Slide Assembly, Sear Housing Block Assembly, Trigger Bar Assembly, Slide Stop Assembly, End Cap Assembly, Recoil Guide Rod Assembly, Magazine Assembly, Magazine Catch Assembly, Frame Tool

February 3rd, 2013, 12:15 AM	#17
cwp297 Junior Member Join Date: Jan 2013 Location: East Tennessee Posts: 3	M&P Exploded View w/ parts? Here is something I "Photochopped" together for my M&P 40c. I hope it helps. (I hope the jpeg makes it to the the forum) CP

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nice High Resolution M&P Wallpapers	KI4LIV	MP Full Size Pistols	16	September 3rd, 2010 12:48 PM
M&P Info Parts and exploded view	Jester	MP Reference	19	May 13th, 2009 05:26 PM
High Temp High Performance Lubricant	flanker	MP Rifles	5	October 18th, 2008 08:42 PM
M&P9 Exploded View	johnFL	MP Talk	4	June 13th, 2008 11:45 PM
M&P 40c Exploded View	ProtoPharmacist	MP Compact Pistols	3	August 11th, 2007 09:32 AM

M&P Exploded View (High Resolution)

exploded view smith & wesson m&p

m&p 22 parts diagram

m&p 40 exploded view

m&p exploded diagram

m&p exploded view

m&p parts diagram

m&p shield exploded diagram

m&p shield exploded view

m&p shield parts diagram

s&w m&p exploded view

smith & wesson m&p exploded view

smith and wesson m&p exploded view

April 14th, 2011, 10:31 PM	#1
jasonuscg Senior Member Join Date: Dec 2009 Location: Salish Sea Posts: 3,344	I took the time to convert the .PDF and edit out the part numbers into a high resolution .PNG for everyone to use. I'll be adding in numbers to correlate to a list of parts with proper nomenclature when I get around to it, I'll post it in this thread. For now, enjoy. Here is a link to an uncropped version. http://img5.imagesha.../mpexploded.png

April 14th, 2011, 11:08 PM	#3
KRWeiss Senior Member Join Date: Oct 2007 Location: Northwest Posts: 6,542	What are the chances of getting an expoded parts diagram of an M&P built in the last 4 years, this decade, 2011...?

April 15th, 2011, 05:35 AM	#5
mpco Member Join Date: Apr 2011 Posts: 49	Thanks jasonuscg! Appreciate the work. Dave

April 15th, 2011, 07:46 AM	#6
BARobinson Join Date: Mar 2011 Location: North, Idaho Posts: 109	Nice job, thank you

April 15th, 2011, 12:38 PM	#7
dhunley1 Senior Member Join Date: Aug 2010 Location: Michigan Posts: 1,370	Cool. Thanks for sharing.

April 27th, 2011, 08:55 PM	#8
sed Join Date: Dec 2009 Posts: 34	Thanks for sharing.

May 9th, 2011, 11:14 AM	#9
JDP_12 Join Date: Feb 2009 Location: MetroWest MA Posts: 22	Very cool - this is a much needed document. All of the diagrams out there are low-res CRAP! Nice work. Looking forward to the annotated one. Thank you!

July 8th, 2012, 01:02 PM	#10
jasonuscg Senior Member Join Date: Dec 2009 Location: Salish Sea Posts: 3,344	It seems as though ImageShack has reduced my file's resolution (a-holes)... I guess I need to reload it once I am able to get back to my desktop.

July 8th, 2012, 02:21 PM	#11
cdunn Member Join Date: Dec 2011 Location: Falls Church, VA Posts: 56	thanks,is there a version with part#s and names?

July 8th, 2012, 04:25 PM	#12
MCarmer Member Join Date: Apr 2012 Posts: 35	not the newest M&PS but its still pretty darn neat.

December 4th, 2012, 08:46 AM	#14
OCMP9 Junior Member Join Date: Dec 2012 Location: CA Posts: 4	Thanks!

January 22nd, 2013, 12:08 PM	#15
GTownGeorge Member Join Date: Jan 2013 Location: Germantown, TN Posts: 78	What is the pin that is perpendicular to the slide to the rear of the ejector port? And what is its purpose? Just curious.

January 22nd, 2013, 01:52 PM	#16
94gtcoupe Junior Member Join Date: Aug 2012 Location: United States Posts: 19	Extractor pin. Holds the extractor in place. OP, thanks for posting up the hi res image.